Bolt set for Buttkicker Simulation Kit

£1.99 excl. tax

Bolt nut and washer set to fit a single Buttkicker Simulation Kit to the RSR-21

In stock

Category:

Description

Bolt nut and washer set to fit a single Buttkicker Simulation Kit to the RSR-21 (drilling required)

3x M6x45mm button cap head bolts

3x M6 Nylock nuts

6 x washers

We have consulted with Network Music Ltd and along with in house testing to come to the conclusion that the Buttkicker Simulation kit is the optimum ‘shaker’ device. In 1, 2, or 4 transducer layouts. In positions shown.

To fit a single buttkicker transducer as shown remove the central spar from the seat box (this reduces the stiffness of the seatbox by a negligible amount) Position the transducer as shown, measure position to ensure central, mark and drill holes. Finally bolt to the base using the bolt kit. The spar bolts can be reinstalled as shown in the photos so fill teh holes in the seat base.

For a 4 transducer systems the spar can stay and the transducers can be positioned where shown. One bolt kit per transducer.

Not for Buttkicker Gamer, these are designed for desk chairs.